Tube Fin Removal Tool
Removes Fin from Tube O.D.

Eliminates chipping hammers and saves time

  1. Removes 4.0” (101mm) depth of fin from the tube O.D. in less than 2 minutes
  2. Standard working range of 1.25” to 2.5” O.D.
  3. Heavy duty rack and pinion feed mechanism assures smooth operation for greater fin removal control
  4. Rigidly clamps to the tube I.D.
  5. Works in any orientation
  6. Easy to operate and no reaction torque to operator
  7. No cutting fluid is required
  8. Saves a lot of time by eliminating chipping and grinding

Patented tool removes 4.0” of finmaster from the tube O.D. in minutes

The Finmaster tube fin removal tool clamps to the tube I.D. and features a patented cutter blade which separates fin from tube O.D. forget about chipping hammers and grinders. This tool removes 4.0” (101mm) of fin from a tube O.D. in under 2 minutes and is a real time saver.

Easy to operate, the Finmaster is operator friendly and has its wrenches conveniently attached for maximum efficiency. Once the tool is attached to the tube I.D. and the power is activated, the operator advances the rotating cutter and engages the spirally wound fin until the desired amount of fin is removed. The quick action of the rack and pinion feed allows the operator to disengage the feed and clear the separated fin from the cutter quickly.

Model Cutmaster Standard Cutmaster Low Profile
Part No. 200009 200009LP
Motor 3 hp (2237 W) 3 hp (2237 W)
Air Pressure 90 psi (6.2 bar) 90 psi (6.2 bar)
Air Volume 80 cfm (2265 it / min) 80 cfm (2265 it / min)
Speed 5050 rpm 5050 rpm
Radial Clearance 343mm with 12 inch blade fully 19.1mm with 10 inch blade fully
plunged into tube plunged into tube
Cut Depth 111.13mm 85.7mm
Working Weight 12.7 kg 13 kg
Shipping Weight 29.5 kg 29.5 kg
Track 5ft. (1,524mm) 9 kg 9 kg
Shipping Dimensions 27" x 15" x 11"
(686mm x 381mm x 254mm)
27" x 15" x 11"
(686mm x 381mm x 254mm)
Track 66" x 3" (1676mm x 77mm) 66" x 3" (1676mm x 77mm)

Download Catalog